TTFT vs Throughput: Which Metric Impacts Users More?

Introduction

Modern generative‑AI experiences hinge on speed. When a user types a question into a chatbot or triggers a long‑form summarization pipeline, two latency metrics define their experience: Time‑to‑first‑token (TTFT) and throughput. TTFT measures how quickly the first sign of life appears after a prompt; throughput measures how many tokens per second, requests per second or other units of work a system can process. Over the past two years, these metrics have become central to debates about model selection, infrastructure choices and user satisfaction.

In early generative systems circa 2021, any response within a few seconds felt magical. Today, with LLMs embedded in IDEs, voice assistants and decision support tools, users expect nearly instantaneous feedback. New research on goodput—the rate of outputs that meet latency service‑level objectives (SLOs)—shows that raw throughput often hides poor user experience. At the same time, innovations like prefill‑decode disaggregation have transformed server architectures. In this article we unpack what TTFT and throughput actually measure, why they matter, how to optimize them, and when one should take priority over the other. We also weave in Clarifai’s platform features—compute orchestration, model inference, local runners and analytics—to show how modern tooling can support these goals.

Quick Digest

• Definitions & Evolution: TTFT reflects responsiveness and psychological perception, while throughput reflects system capacity. Goodput bridges them by counting only SLO‑compliant outputs.
  
  
• Context‑Driven Trade‑offs: For human‑centric interfaces, low TTFT builds trust; for batch or cost‑sensitive pipelines, high throughput (and goodput) drives efficiency.
  
  
• Optimization Frameworks: The Perception–Capacity Matrix, Acknowledge‑Flow‑Complete model and Latency–Throughput Tuning Checklist provide structured approaches to balancing metrics across workloads.
  
  
• Clarifai Integration: Clarifai’s compute orchestration and local runners reduce network latency and support hybrid deployments, while its analytics dashboards expose real‑time TTFT, percentile latencies and goodput.
  
  

Defining TTFT and Throughput in LLM Inference

Why do these metrics exist?

The labels may be new, but the tension behind them is old: systems must feel responsive while maximizing work done. TTFT is defined as the time between sending a prompt and receiving the first output token. It captures user‑perceived responsiveness: the moment a chat UI streams the first word, anxiety diminishes. Throughput, in contrast, measures total productive work—often expressed as tokens per second (TPS) or requests per second (RPS). Historically, early inference servers optimized throughput by batching requests and filling GPU pipelines; however, this often delayed the first token and undermined interactivity.

How are they calculated?

At a high level, end‑to‑end latency equals TTFT + generation time. Generation time itself can be decomposed into time‑per‑output‑token (TPOT) and the total number of output tokens. Throughput metrics vary: some frameworks compute request‑weighted TPS, while others use token‑weighted averages. Good instrumentation logs each event—prompt arrival, prefill completion, token emission—and counts tokens to derive TTFT, TPOT and TPS.

Trade‑offs and misinterpretations

Low TTFT delights users but can limit throughput because smaller batches underutilize GPUs. Conversely, maximizing throughput via large batches or heavy prompts can inflate TTFT and degrade perception. A common mistake is to equate average latency with TTFT; averages hide long‑tail percentiles that frustrate users. Another misconception is that high TPS implies good user experience; in reality, a provider may produce many tokens quickly but start streaming after several seconds.

Original Framework: Perception–Capacity Matrix

To help teams visualize these dynamics, consider the Perception–Capacity Matrix:

• Quadrant I: High TTFT / Low Throughput – worst of both worlds; often due to large prompts or overloaded hardware.
  
  
• Quadrant II: Low TTFT / Low Throughput – ideal for chatbots and code editors; invests in quick response but processes fewer requests concurrently.
  
  
• Quadrant III: High TTFT / High Throughput – batch‑oriented pipelines; acceptable for long‑form generation or offline tasks but poor for interactivity.
  
  
• Quadrant IV: Low TTFT / High Throughput – aspirational; often requires advanced caching, dynamic batching and disaggregation.
  
  

Mapping workloads onto this matrix helps decide where to invest engineering effort: interactive applications should target Quadrant II, while offline summarization can live in Quadrant III.

Expert Insights

• Interactive applications depend on TTFT: Anyscale notes that interactive workloads benefit most from low TTFT.
  
  
• Throughput shapes cost: Larger batches and high TPS maximize GPU utilization and lower per‑token cost.
  
  
• High TPS can be misleading: Independent benchmarks show providers with high TPS but poor TTFT.
  
  
• Clarifai analytics: Clarifai’s dashboard tracks TTFT, TPOT and TPS in real time, enabling users to monitor long‑tail percentiles.
  
  

Quick Summary

• What is TTFT? The time until the first token appears.
  
  
• Why care? It shapes user perception and trust.
  
  
• What is throughput? Total work done per second.
  
  
• Key trade‑off: Low TTFT usually reduces throughput and vice versa.
  
  

Why TTFT Matters More for Human‑Centric Applications

Humans hate waiting in silence

Psychologists have shown that people perceive idle waiting as longer than the actual time. In digital interfaces, a delay before the first token triggers doubts about whether a request was received or if the system is “stuck.” TTFT functions like a typing indicator—it reassures the user that progress is happening and sets expectations for the rest of the response. For chatbots, voice assistants and code editors, even 300 ms differences can affect satisfaction.

Operational playbook to reduce TTFT

1. Measure baseline: Use observability tools to collect TTFT, p95/p99 latencies and GPU utilization; Clarifai’s dashboard provides these metrics.
   
   
2. Optimize prompts: Remove unnecessary context, compress instructions and order information by importance.
   
   
3. Choose the right model: Smaller models or Mixture‑of‑Experts configurations shorten prefill time; Clarifai offers small models and custom model uploads.
   
   
4. Reuse KV caches: When repeating context across requests, reuse cached attention values to skip prefill.
   
   
5. Deploy closer to users: Use Clarifai’s Local Runners to run inference on‑premise or at the edge, cutting network delays.
   
   

For chatbots and real‑time translation, aim for TTFT under 500 ms; code completion tools may require sub‑200 ms latencies.

When TTFT should not be prioritized

• Batch analytics: If responses are consumed by machines rather than humans, a few seconds of TTFT have minimal impact.
  
  
• Streaming with heavy generation: In tasks like essay writing, users may accept a slower start if tokens subsequently stream quickly. However, avoid using long prompts that block user feedback for tens of seconds.
  
  
• Network noise: Optimizing model-level TTFT doesn’t help if network latency dominates; on‑premise deployment solves this.
  
  

Original Framework: Acknowledge‑Flow‑Complete Model

This model breaks user experience into three phases:

1. Acknowledge – the first token signals the system heard you.
   
   
2. Flow – steady token streaming with predictable inter‑token latency; irregular bursts disrupt reading.
   
   
3. Complete – the answer finishes when the last token arrives or the user stops reading.
   
   

By instrumenting each phase, engineers can identify where delays occur and target optimizations accordingly.

Expert Insights

• Human reading speed is limited: Baseten notes that humans read only 4–7 tokens per second, so extremely high throughput does not translate to better perception.
  
  
• TTFT builds trust: CodeAnt highlights how quick acknowledgment reduces cognitive load and user abandonment.
  
  
• Clarifai’s Reasoning Engine benchmarks: Independent benchmarks show Clarifai achieving TTFT of 0.32 s with 544 tokens/s throughput, demonstrating that good engineering can balance both.
  
  

Quick Summary

• When to prioritize TTFT? Whenever a human is waiting on the answer, such as in chat, voice or coding.
  
  
• How to optimize? Measure baseline, shrink prompts, pick smaller models, reuse caches and reduce network hops.
  
  
• Pitfalls to avoid: Assuming streaming alone fixes responsiveness; ignoring network latency; neglecting p95/p99 tails.
  
  

When Throughput Takes Priority—Scaling for Efficiency and Cost

Throughput for batch and server efficiency

Throughput measures how many tokens or requests a system processes per second. For batch summarization, document generation or API backends that process thousands of concurrent requests, maximizing throughput reduces per‑token cost and infrastructure spend. In 2025, open‑source servers began to saturate GPUs by continuous batching, grouping requests across iterations.

Operational strategies

• Dynamic batching: Adjust batch size based on request lengths and SLOs; group similar length prompts to reduce padding and memory waste.
  
  
• Prefill‑decode disaggregation: Separate prompt ingestion (prefill) from token generation (decode) across GPU pools to eliminate interference and enable independent scaling.
  
  
• Compute orchestration: Use Clarifai’s compute orchestration to spin up compute pools in the cloud or on‑prem and automatically scale them based on load.
  
  
• Goodput tracking: Measure not just raw TPS but the fraction of requests meeting SLOs.
  
  

Decision logic

• If tasks are offline or machine‑consumed: Maximize throughput. Choose larger batch sizes and accept TTFT of several seconds.
  
  
• If tasks require mixed human/machine consumption: Use dynamic strategies; maintain moderate TTFT (<3 s) while increasing throughput via disaggregation.
  
  
• If tasks are highly interactive: Keep batch sizes small and avoid sacrificing TTFT.
  
  

Original Framework: Batch‑Latency Trade‑off Curve

Visualize throughput on one axis and TTFT on the other. As batch size increases, throughput climbs quickly then plateaus, while TTFT increases roughly linearly. The “sweet spot” lies where throughput gains begin to taper yet TTFT remains acceptable. Overlays of cost per million tokens help teams choose the economically optimal batch size.

Common mistakes

• Chasing throughput without goodput: Systems that achieve high TPS with many long‑running requests may violate latency SLOs, lowering goodput.
  
  
• Comparing TPS across providers blindly: Throughput numbers depend on prompt length, model size and hardware; reporting a single TPS figure without context can mislead.
  
  
• Ignoring data transfer: Throughput gains vanish if network or storage bottlenecks throttle token streaming.
  
  

Expert Insights

• Research on prefill‑decode disaggregation: DistServe and successor systems show that splitting phases enables independent optimization.
  
  
• Clarifai’s Local Runners: Running inference on‑prem reduces network overhead and allows enterprises to select hardware tuned for throughput while meeting data residency requirements.
  
  
• Goodput adoption: Papers published in 2024–2025 argue for focusing on goodput rather than raw throughput, signalling an industry shift.
  
  

Quick Summary

• When to prioritize throughput? For batch workloads, document pipelines, and scenarios where cost per token matters more than immediate responsiveness.
  
  
• How to scale? Apply dynamic batching, adopt prefill‑decode disaggregation, track goodput and leverage orchestration tools to adjust resources.
  
  
• Watch out for: High throughput numbers with low goodput; ignoring latency SLOs; not considering network or storage bottlenecks.
  
  

Balancing TTFT and Throughput—Decision Frameworks and Optimization Strategies

Understanding the inherent trade‑off

LLM serving involves balancing two competing goals: keep TTFT low for responsiveness while maximizing throughput for efficiency. The trade‑off arises because prefill operations consume GPU memory and bandwidth; large prompts produce interference with ongoing decodes. Effective optimization therefore requires a holistic approach.

Step‑by‑step tuning guide

1. Collect baseline metrics: Use Clarifai’s analytics or open‑source tools to measure TTFT, TPS, TPOT and percentile latencies under representative workloads.
   
   
2. Tune prompts: Shorten prompts, compress context and reorder important information.
   
   
3. Select models strategically: Small or Mixture‑of‑Experts models reduce prefill time and can maintain accuracy for many tasks. Clarifai allows uploading custom models or selecting from curated small models.
   
   
4. Leverage caching: Use KV‑cache reuse and prefix caching to bypass expensive prefill steps.
   
   
5. Apply dynamic batching and prefill‑decode disaggregation: Adjust batch sizes based on traffic patterns and separate prefill from decode to improve goodput.
   
   
6. Deploy near users: Choose between cloud, edge or on‑prem deployments; Clarifai’s Local Runners enable on‑prem inference for low TTFT and data sovereignty.
   
   
7. Iterate using metrics: Set SLO thresholds (e.g., TTFT <500 ms, TPOT <50 ms) and iterate. Use Clarifai’s alerting to trigger scaling or adjust batch sizes when p95/p99 latencies exceed targets.
   
   

Decision tree for different workloads

• Interactive with short responses: Choose small models and small batch sizes; reuse caches; scale horizontally when traffic spikes.
  
  
• Long‑form generation with human readers: Accept TTFT up to ~3 s; focus on stable inter‑token latency; stream results.
  
  
• Offline analytics: Use large batches; separate prefill and decode; aim for maximum throughput and high goodput.
  
  

Original Framework: Latency–Throughput Tuning Checklist

To operationalize these guidelines, create a checklist grouped by categories:

• Prompt Design: Are prompts short and ordered by importance? Have you removed unnecessary examples?
  
  
• Model Selection: Is the chosen model the smallest model that meets accuracy requirements? Should you switch to a Mixture‑of‑Experts?
  
  
• Caching: Have you enabled KV‑cache reuse or prefix caching? Are caches being transferred efficiently?
  
  
• Batching: Is your batch size optimized for current traffic? Do you use dynamic or continuous batching?
  
  
• Deployment: Are you serving from the region closest to users? Could local runners reduce network latency?
  
  
• Monitoring: Are you measuring TTFT, TPOT, TPS and goodput? Do you have alerts for p95/p99 latencies?
  
  

Reviewing this list before each deployment or scaling event helps maintain performance balance.

Expert Insights

• Infrastructure matters: DBASolved emphasizes that GPU memory bandwidth and network latency often dominate TTFT.
  
  
• Prompt engineering is powerful: CodeAnt provides recipes for compressing prompts and reorganizing context.
  
  
• Adaptive batching algorithms: Research on length‑aware and SLO‑aware batching reduces padding and out‑of‑memory errors.
  
  

Quick Summary

• How to balance both metrics? Collect baseline metrics, tune prompts and models, apply caching, adjust batches, choose deployment location and monitor p95/p99 latencies.
  
  
• Framework to use: The Latency–Throughput Tuning Checklist ensures no optimization area is missed.
  
  
• Key caution: Over‑tuning for one metric can starve another; use metrics and decision trees to guide adjustments.
  
  

Case Study – Comparing Providers & Clarifai’s Reasoning Engine

Benchmarking landscape

Independent benchmarks like Artificial Analysis evaluate providers on common models (e.g., GPT‑OSS‑120B). In 2025–2026, these benchmarks surfaced surprising differences: some providers delivered exceptionally high TPS but had TTFTs above four seconds, while others achieved sub‑second TTFT with moderate throughput. Clarifai’s platform recorded TTFT of ~0.32 s and 544 tokens/s throughput at a competitive cost; another test found 0.27 s TTFT and 313 TPS at $0.16/1M tokens.

Operational comparison

Create a simple comparison table for conceptual understanding (names anonymized). The values are representative:

Provider A resembles Clarifai’s Reasoning Engine. Provider B emphasizes throughput at the expense of TTFT. Provider C may represent a hybrid player balancing both. Provider D shows that extremely high throughput can coincide with very poor TTFT and may only suit offline tasks.

Choosing the right provider

• Startups building chatbots or assistants: Choose providers with low TTFT and moderate throughput; ensure you have instrumentation and the ability to tune prompts.
  
  
• Batch pipelines: Select high‑throughput providers with good cost efficiency; ensure SLOs are still met.
  
  
• Enterprises requiring flexibility: Evaluate whether the platform offers compute orchestration and local runners to deploy across clouds or on‑prem.
  
  
• Regulated industries: Verify that the platform supports data residency and governance; Clarifai’s control center and fairness dashboards help with compliance.
  
  

Original Framework: Provider Fit Matrix

Plot TTFT on one axis and throughput on the other; overlay cost per million tokens and capability (e.g., local deployment, fairness tools). Use this matrix to decide which provider fits your persona (startup, enterprise, research) and workload (chatbot, batch generation, analytics).

Expert Insights

• Independence matters: Benchmarks vary widely; ensure comparisons are done on the same model with the same prompts to make fair conclusions.
  
  
• Clarifai differentiators: Clarifai’s compute orchestration and local runners enable on‑prem deployment and model portability; analytics dashboards provide real‑time TTFT and percentile latency monitoring.
  
  
• Watch tail latencies: A provider with low average TTFT but high p99 latency may still yield poor user experience.
  
  

Quick Summary

• What matters in benchmarks? TTFT, throughput, cost and deployment flexibility.
  
  
• Which provider to choose? Match provider strengths to your persona and workload; for interactive apps, prioritize TTFT; for batch jobs, prioritize throughput and cost.
  
  
• Caveats: Benchmarks are model‑specific; check data residency and compliance requirements.
  
  

Beyond Throughput – Introducing Goodput and Percentile Latencies

Why throughput isn’t enough

Throughput counts all tokens, regardless of how long they took to arrive. Goodput focuses on outputs that meet latency SLOs. A system may process 100 requests per second, but if only 30% meet the TTFT and TPOT targets, the goodput is effectively 30 r/s. The emerging consensus in 2025–2026 is that optimizing for goodput better aligns engineering with user satisfaction.

Defining and measuring goodput

Goodput is defined as the maximum sustained arrival rate at which a specified fraction of requests meet both TTFT and TPOT SLOs. For token‑level metrics, goodput can be expressed as the sum of outputs meeting SLO constraints divided by time. Emerging frameworks like smooth goodput further penalize prolonged user idle time and reward early completion.

To measure goodput:

1. Set SLO thresholds (e.g., TTFT <500 ms, TPOT <50 ms).
   
   
2. Instrument at fine granularity: log prefill completion, each token emission and request completion.
   
   
3. Compute the fraction of outputs meeting SLOs and divide by elapsed time.
   
   
4. Visualize percentile latencies (p50, p95, p99) to identify tail effects.
   
   

Clarifai’s analytics dashboard allows configuring alerts on p95/p99 latencies and goodput thresholds, making it easier to prevent SLO violations.

Goodput in the context of emerging architectures

Prefill‑decode disaggregation enables independent scaling of phases, improving both goodput and throughput. Advanced scheduling algorithms—length‑aware batching, SLO‑aware admission control and deadline‑aware scheduling—focus on maximizing goodput rather than raw throughput. Hardware‑software co‑design, such as specialized kernels for prefill and decode, further raises the ceiling.

Original Framework: Goodput Dashboard

A Goodput Dashboard should include:

• Goodput over time vs. raw throughput.
  
  
• Distribution of TTFT and TPOT to highlight tail latencies.
  
  
• SLO compliance rate as a gauge (e.g., green above 95%, yellow 90–95%, red below 90%).
  
  
• Phase utilization (prefill vs decode) to identify bottlenecks.
  
  
• Per‑persona view: separate metrics for interactive vs batch clients.
  
  

Integrating this dashboard into your monitoring stack ensures engineering decisions remain aligned with user experience.

Expert Insights

• Focus on user‑satisfying outputs: Research emphasises that goodput better captures user happiness than aggregate throughput.
  
  
• Latency percentiles matter: High p99 latencies can cause a small subset of users to abandon sessions.
  
  
• SLO‑aware algorithms: New scheduling approaches dynamically adjust batching and admission to maximize goodput.
  
  

Quick Summary

• What is goodput? The rate of outputs meeting latency SLOs.
  
  
• Why care? High throughput can mask slow outliers; goodput ensures user satisfaction.
  
  
• How to measure? Instrument TTFT and TPOT, set SLOs, compute compliance, track percentile latencies and use dashboards.
  
  

Emerging Trends and Future Outlook (2026+)

Hardware, models and architectures

By 2026, new GPUs like NVIDIA’s H100 successor (H200/B200) offer higher memory bandwidth, enabling faster prefill and decode. Open‑source inference engines such as FlashInfer and PagedAttention reduce inter‑token latency by 30–70%. Research labs have shifted towards disaggregated architectures by default, and scheduling algorithms now adapt to workload patterns and network conditions. Models are more diverse: mixture‑of‑experts, multimodal and agentic models require flexible infrastructure.

Strategic implications

• Hybrid deployment becomes the norm: Enterprises mix cloud, edge and on‑prem inference; Clarifai’s local runners support data sovereignty and low latency.
  
  
• Configurable modes: Future systems may let users choose between Ultra Low TTFT and Maximum Throughput modes on the fly.
  
  
• Goodput‑centric SLAs: Contracts will include goodput guarantees rather than raw TPS.
  
  
• Responsible AI demands: Fairness dashboards, bias mitigation and audit logs become mandatory.
  
  

Original Framework: Future‑Readiness Checklist

To prepare for the evolving landscape:

• Monitor hardware roadmaps: Plan upgrades based on memory bandwidth and local availability.
  
  
• Adopt modular architectures: Ensure your serving stack can swap inference engines (e.g., vLLM, TensorRT‑LLM, FlashInfer) without rewrites.
  
  
• Invest in observability: Track TTFT, TPOT, throughput, goodput and fairness metrics; use Clarifai’s analytics and fairness dashboards.
  
  
• Plan for hybrid deployments: Use compute orchestration and local runners to run on cloud, edge and on‑prem simultaneously.
  
  
• Stay up to date: Participate in open‑source communities; follow research on disaggregated serving and goodput algorithms.
  
  

Expert Insights

• Disaggregation becomes default: By late 2025, almost all production‑grade frameworks adopted prefill‑decode disaggregation.
  
  
• Latency improvements outpace Moore’s law: Serving systems improved more than 2× in 18 months, reducing both TTFT and cost.
  
  
• Regulatory pressure rises: Data residency and AI‑specific regulation (e.g., EU AI Act) drive demand for local deployment and governance tools.
  
  

Quick Summary

• What’s next? Faster GPUs, new inference engines (FlashInfer, PagedAttention), disaggregated serving, hybrid deployments and goodput‑centric SLAs.
  
  
• How to prepare? Build modular, observable and compliant stacks using compute orchestration and local runners, and stay active in the community.
  
  
• Key insight: Latency and throughput improvements will continue, but goodput and governance will define competitive advantage.
  
  

Frequently Asked Questions (FAQ)

What is TTFT and why does it matter?

TTFT stands for time‑to‑first‑token—the delay before the first output appears. It matters because it shapes user perception and trust. For interactive applications, aim for TTFT under 500 ms.

How is throughput different from goodput?

Throughput measures raw tokens or requests per second. Goodput counts only those outputs that meet latency SLOs, aligning better with user satisfaction.

Can I optimize both TTFT and throughput?

Yes, but there is a trade‑off. Use the Latency–Throughput Tuning Checklist: optimize prompts, choose smaller models, enable caching, adjust batch sizes and deploy near users. Monitor p95/p99 latencies and goodput to ensure one metric doesn’t sacrifice the other.

What is prefill‑decode disaggregation?

It’s an architecture that separates prompt ingestion (prefill) from token generation (decode), allowing independent scaling and reducing interference. Disaggregation has become the default for large‑scale serving and improves both TTFT and throughput.

How do Clarifai’s products help?

Clarifai’s compute orchestration spins up secure environments across clouds or on‑prem. Local runners let you deploy models near data sources, reducing network latency and meeting regulatory requirements. Model inference services support multiple models, with fairness dashboards for monitoring bias. Its analytics track TTFT, TPOT, TPS and goodput in real time.

By using frameworks like the Perception–Capacity Matrix and Latency–Throughput Tuning Checklist, focusing on goodput rather than raw throughput, and leveraging modern tools like Clarifai’s compute orchestration and local runners, teams can deliver AI experiences that feel instantaneous and scale efficiently into 2026 and beyond.